Hardware

A double-tapped bushing is a fitting which serves as a reducer. It is a sleeve similar to a close nipple but is threaded on both its inner and oute...

A complete coupling consists of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are a...

304 Stainless Steel Barbed Beverage Fittings are corrosion-resistant and designed for use in most commercial food handling applications. The barbs ...

A complete coupling consists of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are a...

Garden-hose-to-NPT adapters and connectors are typically used to connect garden hoses to pipes. They can also change the gender of a threaded end o...

316 Stainless Steel Barbed Beverage Fittings are corrosion-resistant and designed for use in most commercial food handling applications. The barbs ...

In plumbing and piping, a nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for conne...

OD ID Working Pressure @ 72 °F (22 °C) Length 3/8" 1/4" 50 PSI 100' 1/2" 3/8" 35 PSI 100' 5/8" 1/2" 35 PSI 100' 3/4" 1/2" 50 PSI ...

Applications: For use in water, oil and gas applications Features: Blow-out proof stem Reduced and Full port available Construction: 316 stain...

A complete coupling consists of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are a...

Garden-hose-to-NPT adapters and connectors are typically used to connect garden hoses to pipes. They can also change the gender of a threaded end o...

A complete coupling consists of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are a...

Dixon H-Series Hydraulic Female Threaded Couplers are composed of solid steel and feature stainless steel balls, retaining rings, and springs to he...

Safety Note: Do not use pipe nipples as hose inserts.

Use: Right-Hand Thread for Oxygen Line It is recommended that hose assemblies be fabricated using hose clamps or crimped ferrules in con...

OD ID Working Pressure @ 72 °F (22 °C) Length 5/16" 3/16" 55 PSI 100' 3/8" 1/4" 55 PSI 100' 1/2" 1/4" 70 PSI 100' 7/16" 5/16" 50 ...

OD ID Working Pressure @ 72 °F (22 °C) Length 5/16" 3/16" 55 PSI 100' 3/8" 1/4" 55 PSI 100' 1/2" 1/4" 70 PSI 100' 7/16" 5/16" 50 ...

A nipple is a short stub of a pipe which connects two other fittings. These NPT Threaded Pipe Fittings Class 150# 316 stainless steel has a higher ...

A union also connects two pipes, but is quite different from a coupling, as it allows future disconnection of the pipes for maintenance. These NPT ...

A coupling connects two pipes. These NPT Threaded Pipe Fittings Class 150# 316 stainless steel has a higher nickel content for better corrosion res...

A complete coupling consists of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are a...

Interlocked worm gear hose clamps help secure many types of hoses, including pneumatic and exhaust hoses. A general-purpose hose clamp is interlock...

Garden hose washers help create a leak-resistant seal between garden hoses and accessories, such as sprayers and nozzles. These rubber parts fit in...

Barbed mender fittings are using when installing flexible tubing for either gasses or liquids. Made out of 304 stainless steel, it is durable and r...